Location:Category:Charger Split DiskCharger Touring BracketSTEP 02STEP 02STEP 03STEP 03With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place. No pins needed. The Charger Touring Bracket is the future of Union Binding splitboard technology. Simple, easy to use, and incredibly light weight. IntroExpedition©Core SRL.Total Binding Models: 20 +TEAM +APPROACH +INNOVATIONSTEP 01STEP 01Pull the lever up in the rear baseplate and position the baseplate over the disk at a 90* angle, the lever should align with with the two reference points on the disk. Push the baseplate down onto the disk.Turn the baseplate vertical and align it with the bracket tips.Turn the baseplate counterclockwise until it stops.The bindings rotatoin will help to pull the two halves of the splitboard together allowing for the best possible splitboard connection. Slide the baseplate inwards until you feel it stop. Be sure to push the baseplate fully into place before pushing down. The baseplate will only release at a full 90* angle.Push the lever down to lock the binding into place. You're now ready to strap in and enjoy the ride down. You're now ready to tour. For help on steep climbs, flip down the heel riser underneath the baseplate and lock securely into place.unionbindingcompany.comCharger Process2022/23Digital Overview
元のページ ../index.html#36